Analogue and digital pressure indicators from -0.9 Bar to 130 Bar using MSA Test Methods 1 & 2 Australian Standards requires that pressure gauges less than 63mm face diameter read 3% or better, from 10% to 90% of the Full range. All other gauges, must read 1% or better, from 10% to 90% of Full range.
We clean your instrument, check fuses, replace battery (if required) and check test leads (if supplied) then carry out a verification in accordance to the Manufacturers Specifications (if available). If additional test points are required please consult with us and we can add these into our test procedure. If your test equipment fails to perform or fails it’s specification we will contact you awaiting further instruction before we proceed with any form of service work. If your device fails we can offer an alternative product.