Process Meters
 725Ex Intrinsically Safe Multi-function Process Calibrator |
|
 |
|
The Simply Powerful Intrinsic Safe Calibration Tool
The new 725Ex Intrinsically Safe Multi-function Process Calibrator is powerful yet easy-to-use. Combined with one of the (8) new Fluke-700PEx pressure modules, the 725Ex is able to calibrate almost any process instrument likely to need service in an area where explosive gasses may be present.
Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.
Do you need to calibrate transmitters? The 725Ex split display lets you view input and output values simultaneously. For valve and I/P tests, you can source mA while measuring pressure. The 725Ex has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests.
From the moment you pick it up, the Fluke 725Ex is ready to perform. Its simple controls, without menus, make operation easy. Its memory functions make set up fast. And its rugged design lets it work as hard as you do.
More Information |
|
|
|
707Ex Intrinsically Safe Loop Calibrator |
|
 |
|
The fast one-handed tool for mA loop checks in Ex zones
The 707Ex is an intrinsically safe loop calibrator for use in explosion endangered areas. The Fluke 707Ex is certified in accordance with the ATEX directive (Ex II 2 G Eex ia IIC T4) in Zones 1 and 2.
More Information |
|
|
|
718Ex Intrinsically Safe Pressure Calibrator |
|
|
|
|
Pump Up the Pressure
The new Fluke 718Ex Intrinsically Safe Pressure Calibrator is a new, powerful intrinsically safe, self contained pressure calibrator for usage in Explosion endangered areas.
More Information |
|
|
|
|
87V Ex Intrinsically Safe True RMS Multimeter |
|
 |
|
Intrinsically safe version of the world’s most popular Multimeter
With its high performance, accuracy and motor drive compatibility, the Fluke 87V is the most popular industrial multimeter in the world. Now Fluke has introduced a new intrinsically safe version – the 87V Ex – for measurements in and around hazardous areas.
The new Fluke 87V Ex has all the measurement and troubleshooting functions of the proven Fluke 87V. Unlike most other ATEX-certified tools, it can be used both inside and outside the hazardous zone (ATEX Zones 1 & 2) without compromising performance or compliance. So there’s no need to carry different tools for use inside or outside the hazardous zones. It also has a built-in thermometer with TC probe, further reducing technicians’ tool counts.
More Information |
Loop Calibrators
705 Loop Calibrator |
|
 |
|
The new Fluke 705 Loop Calibrator is a cost-effective, integrated solution for calibration, repair and maintenance of current loops. It features:
- mA sourcing, simulation and measurement
- 0.02% accuracy and 0.001 mA resolution
- Simultaneous mA and % of span display
- Selectable step or ramp outputs
- 24 V Loop supply with mA measure
- 0-28 VDC measurement to check Loop Voltage
- Easy battery exchange without opening the case
- Compact case with separate protective holster
- Three year warranty
More Information |
|
|
|
707 Loop Calibrator |
|
 |
|
The fastest, one-handed tool for loop checks.
The Fluke 707 Loop Calibrator is a high performance solution for calibration, repair and maintenance of current loops. The new "Quick Click" knob making it extremely fast and easy to use. It features:
- One handed user interface with "Quick Click" detented knob
- mA sourcing, simulation and measurement
- 0.015% accuracy and 0.001 mA resolution
- Simultaneous mA and % of span display
- Selectable step or ramp outputs
- 24 V Loop supply with mA measure, including 250Ω HART resistor
- 0-28 VDC measurement to check Loop Voltage
- Easy battery exchange without opening the case
- Compact case with separate protective holster
- Three year warranty
More Information |
|
|
|
707Ex Intrinsically Safe Loop Calibrator |
|
|
|
The fast one-handed tool for mA loop checks in Ex zones
The 707Ex is an intrinsically safe loop calibrator for use in explosion endangered areas. The Fluke 707Ex is certified in accordance with the ATEX directive (Ex II 2 G Eex ia IIC T4) in Zones 1 and 2.
More Information |
|
|
|
715 Volt/mA Calibrator |
|
 |
|
The Fluke 715 Volt/ mA Calibrator delivers outstanding performance, durability and reliability. Offered in the rugged Fluke 80 Series DMM package, the calibrator is compact, lightweight, and easy to carry. With a push button interface similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 715 is easy to use. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes.
More Information |
| |
|
|
| 771 Milliamp Process Clamp Meter |
|
 |
| |
|
Don’t break the loop on 4-20 mA signal measurements
Measure 4-20 mA signals without breaking the loop with this new, compact clamp meter for PLC and control systems analog I/O. The detachable clamp with extension cable allows you to take measurements in tight locations, and the built-in spot light illuminates hard to see wires in dark enclosures.
Use the 771 to:
- Measure mA signal for PLC and control system analog I/O
- Measure 4 to 20 mA output signals from transmitters without breaking the loop.
- Count on best in class accuracy of 0.2%
- Measure mA signals with 0.01 mA resolution
More Information |
|
|
|
|
| Milliamp Process Clamp Meters |
|
|
| |
|
|
Need more time?
Don’t break the loop on 4-20 mA signal measurements and save time.
Are you spending time?
- Taking mA measurements by removing a wire and breaking the loop
- Calling the control room to isolate a loop
- Testing analog input/output on a console
- Troubleshooting devices with mA inputs and outputs
- Repairing intermittent or erratic 4-20 mA loops
- Going back to the shop to get extra tools
If you need more time in your busy day check out the Fluke 77X mA Clamp Meters. They are designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.
Here are some specific ways the 77X Clamp Meters will help you:
| Milliamp Clamp Features |
Application |
How it saves time and money |
| Measure mA signals for PLC and control system
analog I/O without breaking the loop. (771, 772 and 773) |
Measures low level dc current |
Correlate process indication with real physical value |
| Measure output signals from transmitters without breaking the loop (771, 772 and 773) |
Maintain and troubleshoot process and automation equipment without breaking the loop |
No disruption to the process |
| Detachable clamp with extension cable (771, 772 and 773) |
Measurements
in tight locations |
Enables measurements in difficult situations |
| Source, simulate and measure mA signals in circuit (break the loop) (772 and 773) |
Confirm non-contact measurement. Have the next tool in hand for troubleshooting (source simulate) |
Eliminates the need to return to the shop to
get a loop calibrator for troubleshooting after finding a bad signal
with non-contact measurement |
| Source and measure VDC (773 only) |
Troubleshoot voltage input and output devices. |
Measure presence of 24V loop power. Measure 1 to 5 or 0 to 10V process signals. Test chart recorders |
| 4 to 20 mA In/out (773 only) |
Dual channel mA source and measurement for troubleshooting |
Source 4 to 20 mA signals into valves and mA
signal conditioners and simultaneously measure 4 to 20 mA positioning
output signals. |
| 4 to 20 mA scaled output (773 only) |
Scaled mA output provides a mA signal output representative of the measured mA value |
Connect a logging DMM and log the mA signal without breaking the loop |
| Loop power supply (772 and 773) |
Power a transmitter |
Substitute testing of the installed 24V loop
power supply. Power a transmitter and measure its mA output signal for
troubleshooting. |
| Dual backlit display with both mA measurement
and percent of 4 to 20 mA span (771, 772 and 773) |
Clear measurement presentation |
Allows quick measurement evaluation |
| Measurement Spotlight (771, 772 and 773) |
Illuminates hard to see wires in dark enclosures |
Measurement process is easier and quicker |
| Measure up to 99.9 mA range non-contact (771, 772 and 773) |
Wide range of measurements |
Measures 10 to 50 mA signals in older control systems |
| Automatic power off (771, 772 and 773) |
After 15 minutes and 2 minute automatic off for backlight and spotlight |
Saves battery life |
|
|
More Information
Download Data Sheet |
| |
|
|
787 ProcessMeter™ |
|
 |
|
Double Your Power
A maintenance and calibration tool that will be at home in every instrumentation technician's tool box, the Fluke 787 ProcessMeter™ combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. Based on the trusted Fluke 87 DMM, the 787 adds the ability to measure, source, and simulate dc loop current with 0.05% accuracy and 1 microamp resolution
More Information |
| |
|
|
789 ProcessMeter™ |
|
 |
|
Double Your Power
The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now it’s even better, the range is extended with the new Fluke 789 – the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.
More Information |
Multifunction Calibrators
725Ex Intrinsically Safe Multi-function Process Calibrator |
|
|
|
The Simply Powerful Intrinsic Safe Calibration Tool
The new 725Ex Intrinsically Safe Multi-function Process Calibrator is powerful yet easy-to-use. Combined with one of the (8) new Fluke-700PEx pressure modules, the 725Ex is able to calibrate almost any process instrument likely to need service in an area where explosive gasses may be present.
Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.
Do you need to calibrate transmitters? The 725Ex split display lets you view input and output values simultaneously. For valve and I/P tests, you can source mA while measuring pressure. The 725Ex has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests.
From the moment you pick it up, the Fluke 725Ex is ready to perform. Its simple controls, without menus, make operation easy. Its memory functions make set up fast. And its rugged design lets it work as hard as you do.
More Information |
|
|
|
743/744 Documenting Software - DPC/TRACK |
|
 |
|
Automatically Record and Document Your Work
Fluke-700SW DPC/TRACK software includes an instrumentation data-base that makes it easy to manage your instrumentation, create and schedule tests, load and unload the 743, print a variety of standard reports, and manage calibration data.
DPC/TRACK is available in English, French, German, Spanish, and Italian.
Print standard reports automatically. The software assembles pre-formatted reports from your database files, saving time and reducing errors. Reports include calibration certificates, instruments due for calibration, inventory characteristics, calibration histories, calibration procedures, and traceability to instruments touched.
User-defined lists enable technicians to select reasons for work, problems found, and actions taken from lists you define. These lists work with your application software to automatically generate a complete record of calibration results and actions that can fulfill documentation requirements for ISO-9000 and other quality regulations. More Information |
|
|
|
725 Multifunction Process Calibrator |
|
 |
|
“Simply Powerful!”
Take along the new Fluke 725 Multifunction Process Calibrator, and you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.
Do you need to calibrate transmitters? The 725's split display lets you view input and output values simultaneously. For valve and I/P tests, you can source mA while measuring pressure. The 725 has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests.
From the moment you pick it up, the Fluke 725 is ready to perform. Its simple controls, without menus, make operation easy. Its memory functions make set up fast. And its rugged design lets it work as hard as you do.
More Information |
|
|
|
726 Precision Multifunction Process Calibrator |
|
 |
|
Get More Calibration Power
The Fluke 726 Precision Multifunction Process Calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything. The 726 will also interpret results without the help of a calculator and store measurement data for later analysis.
More Information |
| |
|
|
| 741B Documenting Process Calibrator |
|
 |
| |
|
“A complete documenting calibrator”
The 741B does the work of several tools – sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. For documentation, the 741B automates calibration procedures and captures your data.
And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations.
The 741B is the choice for plants that use standard company worksheets and that make reports in the shop. It has storage capacity for a day's calibration and measurement data. When you're back at the shop recall the data on screen to fill out calibration forms.
More Information |
|
| |
|
|
743B Documenting Process Calibrator |
|
 |
|
"Do more, carry less"
The 743B does the work of several tools – sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device.
For documentation, the 743B automates calibration procedures and captures your data.
And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations.
The 743B has a PC interface that lets you download procedures, lists, and instructions created with software-or upload data for printing, archiving, and analysis. With its expanded memory, the 743B can hold a full week of calibrations and procedures.
More Information |
| |
|
|
744 Documenting Process Calibrator-HART |
|
 |
|
"Ready for Anything."
As more and more process plants begin to take advantage of smart transmitters, the need for a new generation of calibrators has emerged-calibrators that can communicate via industry standard digital protocols. The 744 combines HART communication capability to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation.
The 744 does the work of several tools - sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device.
For documentation, the 744 automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations.
More Information |
Pressure Calibrators
717 Series Pressure Calibrators |
|
 |
|
The Fluke 717 Pressure Calibrators delivers outstanding performance, durability and reliability. These calibrators are compact, lightweight, and easy to carry. With a push button interface similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 717s are easy to use. They are EMI tolerant, dust and splash resistant, and feature a removable battery door for quick battery changes.
These calibrators come in 9 models measuring pressure up to 5000 psi/345 bar and are compatible with Fluke 700Pxx differential, gage and absolute pressure modules to increase functionality.
More Information |
|
|
|
718 Series Pressure Calibrators |
|
 |
|
The complete solution to pressure calibration
The Fluke 718 pressure calibrator family (includes 4 models) provide a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.
More Information |
|
|
|
718Ex Intrinsically Safe Pressure Calibrator |
|
|
|
|
Pump Up the Pressure
The new Fluke 718Ex Intrinsically Safe Pressure Calibrator is a new, powerful intrinsically safe, self contained pressure calibrator for usage in Explosion endangered areas.
More Information |
|
Temperature Calibrators
712 RTD Process Calibrator |
|
|
|
|
The Fluke 712 RTD temperature calibrator delivers outstanding performance, durability and reliability. The 712 calibrator is a compact, lightweight, and easy to carry tool. With a push button interface similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 712 is easy to use. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes.
More Information |
|
|
|
|
714 Thermocouple Calibrator |
|
 |
|
The Fluke 714 Thermocouple Calibrator delivers outstanding performance, durability and reliability. The calibrator is compact, lightweight, and easy to carry. With a push button interface similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 714 is easy to use. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes.
More Information |
|
|
|
724 Temperature Calibrator |
|
|
|
|
Built for the masters of temperature.
The new Fluke 724: everything you need to troubleshoot and calibrate temperature.
Now you can carry one tool to expertly test all the temperature sensors and transmitters in your plant.
The Fluke 724 is the master’s answer to temperature calibration. The Fluke 724 can measure and source 10 thermocouple types and 7 RTD types, plus volts and ohms.
The Fluke 724 even handles high-speed pulsed RTD circuits and provides loop power.
The dual line measure/source display lets you source temperature and view loop current at the same time.
With its simple, “no menus” controls, the Fluke 724 is easy to operate, too.
More Information |
|
| |
|
|
719 Electric Pressure Calibrator |
|
|
|
|
Forget the Hassle of Hand Pumping
Now you can calibrate and test pressure devices quickly and easily with one hand, saving valuable time. With the innovative, built-in electric pump, the Fluke 719 Electric Pressure Calibrator provides pressure calibration at your fingertips!
Use the programmable pump limit settings to eliminate over-pressurization, and to set ‘pump to’ pressure values. The unique cleanout port design reduces pump failures, and makes the 719 easy to clean without repair. The compact, lightweight form, combined with one-handed calibration, makes this pressure calibrator the ideal tool for busy process professionals.
Pressure calibration made easy, by a name you know and trust for all your process calibration needs
More Information |
|
| |
|
|
|
Products > Test & Measurement > Process > Process Calibration Tools
