Calibrate even your high bandwidth oscilloscopes

The SC1100 enables the enhanced performance 5520A to calibrate all of your oscillosocpes up to 1.1 GHz with rise times to 300 ps – even 125 ps with the 5800A/TDP tunnel diode pulser option. That represents what is likely the highest level of oscilloscopes in your workload – along with the other workload the 5520A addresses.

The 1.1 GHz 5520A-SC1100 is a plug-in module that fits inside the 5520A Multi-Product Calibrator. It can be ordered factory installed with a new calibrator, or added later at a Fluke service center for an additional installation and service charge.

Fluke offers more ways to match the right oscilloscope calibration tools with your workload and budget. The 5500A-SC300 option enables the 5500A and 5520A to calibrate the most widely used analog and digital oscilloscopes up to 300 MHz. If your workload includes oscilloscopes above 300 MHz, you will want to take a look at the 5500A-SC600 option for the 5500A/5520A calibrators. And the powerful Fluke 5820A Oscilloscope Calibrator provides a complete solution for applications dedicated entirely to oscilloscope calibration.

More Information

As well as having a versitile 5500A calibration solutions that will match your workload and budget.

The 5500A's Oscilloscope Calibration options provide level sine wave, fast edge, time mark and amplitude signals for calibration of oscilloscopes up to 600 MHz.

The 5500A was designed to cover a very wide range of medium accuracy electrical measurement devices including:
Handheld and bench multimeters
Oscilloscopes and ScopeMeter® Test Tools
Wattmeters
Analog volt/ohm/amp/watt instruments
Electronic thermometers
Data loggers
Strip chart recorders
XY Recorders
Power harmonics analyzers
Process calibrators
Current clamps
And related instruments

More Information

Take advantage of the world’s best value multi-product calibrator with the additional features of a scope calibrator

For the 9100, calibrating everything from handheld digital multimeters to high performance digital-storage oscilloscopes is all part of a day's work.

The 9100 is a multifunction calibrator with a breadth and depth of outputs never before available from a single calibration source. In addition to DC and AC voltage to 1050V, variable Resistance to 400MΩ and DC and AC current to 20A (1000A via the optional current coils), the 9100 delivers continuously variable capacitance values to 40mF and conductance values to 2.5 milliSiemens. It also generates digitally synthesized and phase-locked sine, square, triangle, impulse and trapezoidal waveforms, variable amplitude pulses to 10 MHz, pulse widths to 2 seconds, and duty cycles between 0.05% and 99.95%.

Add one of the two oscilloscope calibration options and it generates all the waveforms required to calibrate oscilloscopes up to 250 MHz or 600 MHz.

No other multi-product calibrator gives you such wide workload coverage and versatility. Weighing in at only 41 lbs (18.5 kg), it's also the ideal solution to on-site calibration.

Model 9100 - the low-cost solution to calibrating:
C alibrates over 15 different categories of general-purpose test equipment
Options for power meter, insulation/continuity tester and oscilloscope calibration - internally installed and retrofittable
Semi-automated and fully automated procedure modes for maximum calibration throughput
Fully supported by MET/CAL Plus software and procedure libraries
Rapid return on investment
Intuitive front panel operation for ease of use

More Information

The world's highest performance, fully automated, upgradeable oscilloscope calibration workstation

Oscilloscope calibration can be complex, time consuming and expensive. A significant amount of skilled operator interaction and interpretation is often required to complete the job, and today’s multi-channel instruments frequently mean that a great deal of lead switching is required. Even automated systems require significant manual intervention to complete elements of the most simple calibration procedures. Worse still, switching systems or multiplexers used to enable a degree of automation often contribute more errors and aberrations than the instrument being calibrated.

To compound the problem, rapid developments in oscilloscope technology make it difficult to keep up with performance trends without substantial re-investment on a regular basis. The Fluke 9500B Oscilloscope Calibration Workstation breaks that paradigm. It means that the benefits of hands-free, fully-automated, accurate oscilloscope calibration are readily available to everyone at a price and performance level that your needs and budget can support, while ensuring that, through performance upgrades, future needs will be met when the time demands it.

More Information