Triple Point Calibrations > Products > Calibration > Electrical > DC/LF

TriplePoint Calibrations

Tools For Your Trade

Products > Calibration > Electrical > DC/LF

DC/LF Calibrators
< 4.5 Digit Multimeter Calibrators

5500A Multi-Product Calibrator

As well as having a versitile 5500A calibration solutions that will match your workload and budget TThe 5500A's Oscilloscope Calibration options provide level sine wave, fast edge, time mark and amplitude signals for calibration of oscilloscopes up to 600 MHz. The 5500A was designed to cover a very wide range of medium accuracy electrical measurement devices including: Handheld and bench multimeters Oscilloscopes and ScopeMeter® Test Tools Wattmeters Analog volt/ohm/amp/watt instruments Electronic thermometers Data loggers Strip chart recorders XY Recorders Power harmonics analyzers Process calibrators Current clamps And related instruments More Information

9100 Universal Calibration System

Take advantage of the world’s best value multi-product calibrator with the additional features of a scope calibrator For the 9100, calibrating everything from handheld digital multimeters to high performance digital-storage oscilloscopes is all part of a day's work. The 9100 is a multifunction calibrator with a breadth and depth of outputs never before available from a single calibration source. In addition to DC and AC voltage to 1050V, variable Resistance to 400MΩ and DC and AC current to 20A (1000A via the optional current coils), the 9100 delivers continuously variable capacitance values to 40mF and conductance values to 2.5 milliSiemens. It also generates digitally synthesized and phase-locked sine, square, triangle, impulse and trapezoidal waveforms, variable amplitude pulses to 10 MHz, pulse widths to 2 seconds, and duty cycles between 0.05% and 99.95%. Add one of the two oscilloscope calibration options and it generates all the waveforms required to calibrate oscilloscopes up to 250 MHz or 600 MHz. No other multi-product calibrator gives you such wide workload coverage and versatility. Weighing in at only 41 lbs (18.5 kg), it's also the ideal solution to on-site calibration. Model 9100 - the low-cost solution to calibrating: C alibrates over 15 different categories of general-purpose test equipment Options for power meter, insulation/continuity tester and oscilloscope calibration - internally installed and retrofittable Semi-automated and fully automated procedure modes for maximum calibration throughput Fully supported by MET/CAL Plus software and procedure libraries Rapid return on investment Intuitive front panel operation for ease of use More Information

9100E Universal Calibration System

The world’s best value multi-product calibrator If you're constantly being asked to calibrate more and more with less and less, Fluke's 9100E Calibration System is the answer you've been waiting for. Its exceptional performance in both the analog and digital domain allows it to calibrate an extremely wide range of test and measurement equipment - quickly, efficiently and to ISO 9000 requirements. For the 9100E, calibrating everything from handheld digital multimeters to high performance digital-storage oscilloscopes is all part of a day's work. Take advantage of the Model 9100E's unique procedure mode, which guides operators step-by-step through the entire calibration process, and you'll not only calibrate more with less - you'll do it faster. The 9100E is a multifunction calibrator with a breadth and depth of outputs never before available from a single calibration source. In addition to DC and AC voltage to 1050V, variable Resistance to 400MΩ and DC and AC current to 20A (1000A via the current coils), the 9100E delivers continuously variable capacitance values to 40mF and conductance values to 2.5 milliSiemens. It also generates digitally synthesized and phase-locked sine, square, triangle, impulse and trapezoidal waveforms, variable amplitude pulses to 10 MHz, pulse widths to 2 seconds, and duty cycles between 0.05% and 99.95%. Included in the cost of the calibrator you get the Insulation tester option and 10/50 Turn Coil FREE The insulation/ continuity tester synthesizes resistance values as high as 2GΩ at test voltages up to and it synthesizes resistance values as high as 2GΩ at test voltages up to 1000V. No other multi-product calibrator gives you such wide workload coverage and versatility. Weighing in at only 41 lbs (18.5 kg), it's also the ideal solution to on-site calibration. Model 9100E - the lowest cost solution to calibrating:- Calibrates over 15 different categories of general-purpose test equipment Semi-automated and fully automated procedure modes for maximum calibration throughput Fully supported by MET/CAL Plus software and procedure libraries Rapid return on investment Intuitive front panel operation for ease of use More Information

DC/CF Calibrators < 6.5 Digit Multimeter Calibrators

5520A High Performance Multi-Product Calibrators

Calibration solutions that match your workload and budget The Fluke 5520A builds on the 5500A's capabilities, extending its workload coverage even further. Its improved accuracy, expanded ranges, and capability to calibrate 5 1/2 and 6 1/2 digit multimeters can cover virtually all your high-performance workload, including: Handheld and bench meters (analog and digital) up to 6 1/2 digits Thermocouple and RTD thermometers Process calibrators Data loggers Strip and chart recorders Watt meters Power harmonics analyzers Current clamps and clamp meters Analog or digital handheld and bench oscilloscopes (with options) Panel meters Graphical multimeters Power meters, disturbance analyzers, power quality monitors, recorders and other power quality related equipment (with option) More Information

5700A/5720A Multifunction Calibrators

Taking accuracy to a new level The 5700A and 5720A are five-function calibrators designed to address the most demanding electrical calibration workload. They source direct and alternating voltage and current and resistance. A wideband voltage option extends overall ac bandwidth to 10 Hz to 30 MHz to cover to RF voltmeters. Both are compatible with the 5725A, and 5205A/5215A amplifiers. More Information

Multifunction Electrical Tester

Verify and calibrate electrical test tools with a single instrument The Fluke 5320A Multifunction Electrical Tester Calibrator is an accurate, flexible instrument that allows you to calibrate many different types and models of electrical testers efficiently and effectively. The 5320A replaces resistors, decade boxes, and other custom calibration solutions with a single instrument. It features precision high voltage, high current resistors to give you better test uncertainty ratios (TURs). Using one multifunction instrument instead of many allows you to free up valuable bench space and simplify the processes you use for calibrating electrical testers. You will find the 5320A calibrator remarkably easy to use. A big, bright, full-color screen displays values clearly, and shows which terminals are active in an easy-to-comprehend graphic format. An illustrated Help Guide is built into the instrument to provide additional assistance if you need it. For even greater efficiency, the 5320A can be automated with MET/ CAL® Plus Calibration Management Software. MET/CAL Plus software has become the industry standard for automating the calibration process and managing the inventory of your cal lab. MET/CAL Plus is a complete, scalable and affordable solution. LAN, GPIB and RS-232 interfaces on the 5320A provide convenient, industry standard connectivity More Information

A40B Shunts

FLUKE Precision Measurement (FPM) announces the FLUKE A40B Series of Precision Current Shunts. This series simplify AC current measurement and offer improved accuracies with shunts, ranging from 1mA to 100A, useable from DC to 100 kHz. Unlike Fluke A40 and A40A series, the new A40B series of shunts are designed for both DC and AC measurements techniques which greatly improves current measurement metrology. Click Here for more information

© Copyright triplepoint Calibrations ABN: 79 122 047 205 | Contact Us | Sitemap